Floor and Walls
Installing tiles in your bathroom can be a daunting task, but it’s not as difficult as you may think. We will walk you through the process of tiling your bathroom floor and walls with the help of best epoxy flooring in Vancouver. We’ll provide tips and advice along the way, so you can feel confident about tackling this project on your own. Let’s get started!
The first thing you need to do is measure the space you want to tile. This will give you an idea of how much material you’ll need to purchase. Once you have your measurements, head to your local home improvement store and purchase the tiles and grout. You’ll also need a few tools, including a tile cutter, trowel, level, and tape measure.
Now that you have all of your materials, it’s time to start tiling! Begin by spreading a layer of mortar on the floor with your trowel. Then, start placing the tiles in the mortar one by one. Be sure to use your level to ensure that each tile is level with the ones around it. As you work, continue spreading mortar and placing tiles until the floor is complete.
Now it’s time to tile the walls! Spread a layer of mortar onto the wall with your trowel and start placing tiles in the mortar. Work your way up from the bottom of the wall, making sure to staggered the joints as you go. Once you reach the top of the wall, use your tile cutter to trim any excess tiles.
Allow the mortar to cure for at least 24 hours before grouting. Once it’s cured, mix your grout according to package directions and spread it into the joints between tiles with a rubber float. Allow the grout to cure for 24 hours before using your bathroom again.